GJ941X

Gj941x-6l electric pipe clamp valve product overview

The gj941x-6l electric pipe clamp valve produced and sold by Woci valve (Shanghai) Co., Ltd. is composed of electric actuator, left and right valve bodies, rubber pipe sleeves, large and small valve stems, upper and lower rams, guide posts and other parts. Working principle: when the hand wheel is rotated clockwise, the large and small valve rods drive the upper and lower rams at the same time, compress the pipe sleeve, close it, and open it when reversed. In this way, the ram reciprocating up and down between the guide pillars to complete the opening and closing of the valve. In addition, due to the bearing capacity of the rubber pipe sleeve, when opening and closing, as long as the operator feels an appropriate amount of resistance when rotating the hand wheel, they have reached the opening and closing pole. Do not try their best or use more people to assist, and other tools are prohibited to open and close. Gj941x electric pipe clamp valve is applicable to chemical industry, petroleum, power generation, alkali plant, beneficiation, cement, coal preparation, non-metallic and other industries, and can quickly control pipeline concentration, sand flow and cut-off.

Structural features of gj941x-6l electric pipe clamp valve
It is composed of left and right aluminum alloy valve bodies, rubber pipe sleeves, large and small valve stems, upper and lower rams, guide posts and other parts. It has good wear resistance, anti-corrosion, frost resistance and sealing performance. It is as good as new only by replacing the rubber sleeve, and its service life is 4-6 times that of ordinary valves. The driving modes include manual, pneumatic, electric and other modes, and non-standard products can also be customized according to customer needs.

Working principle of gj941x-6l electric pipe clamp valve
After power on, the electric actuator drives the valve rod to work, so that the large and small valve rods drive the upper and lower rams at the same time, compress the pipe sleeve, close, and open when reversed. In this way, the ram reciprocating up and down between the guide pillars to complete the opening and closing of the valve. In addition, due to the bearing capacity of the rubber pipe sleeve, when opening and closing, as long as the operator feels an appropriate amount of resistance when rotating the hand wheel, they have reached the opening and closing pole. Do not try their best or use more people to assist, and other tools are prohibited to open and close.

Parts and materials of gj941x-6l electric pipe clamp valve

Technical parameters of gj941x-6l electric pipe clamp valve

Main external connection dimensions of gj941x-6l electric pipe clamp valve