ZJHP Pneumatic Diaphragm With Hand Wheel Single

zjhp pneumatic diaphragm with hand wheel single-seat regulating valve product description:

the zjhp pneumatic diaphragm with hand wheel single-seat regulating valve produced and sold by woci valve group adopts top guide structure and multi-spring actuators.it has the advantages of compact structure, light weight, sensitive action, s-streamline fluid channel, small pressure drop loss, large valve capacity, accurate flow characteristics, convenient disassembly and assembly, etc.widely used to accurately control gas, liquid and other media, process parameters such as pressure, flow, temperature, liquid level to maintain a given value.especially suitable for small leakage valve before and after the pressure difference is not big working occasions.

this series of products have a standard type, regulation cut off, bellows sealed, jacket insulation and other varieties. nominal product pressure rating pn10,16,40,64; body diameter range dn20 ~ 200. for fluid temperature from -200 ℃ ~ + 560 ℃ range of a variety of grades. leakage standards have grade iv or vi level. flow characteristics are linear or equal percentage. a wide variety of specifications to choose from.

zjhp pneumatic diaphragm with hand wheel single-seat regulating valve features:

1, top-oriented single-seat control valve, compact structure, fewer parts, easy maintenance. 2, the metal spool for a variety of workplaces, up to level iv leakage standards, zxpq-type soft-sealed spool up to level vi leakage standards. 3, the valve body designed by the principle of fluid mechanics, such as cross-section low flow resistance flow channel, the rated flow coefficient increased by 30%. 4, adjustable range, the inherent adjustable ratio of 50. 5, the implementing agencies using multi-spring structure, a 30% reduction in height, weight reduction of 30%. 6, zxpv bellows sealed control valve, the valve stem to form a complete seal, blocking fluid leakage. 7, zxpj-type control valve with a thermal jacket for fluid cooling easy to crystallize, clogging caused by solidification of the occasion.

zjhp pneumatic diaphragm with hand wheel single-seat regulating valve part information:

body, bonnet: ht200, zg230-450 zg1cr18ni9ti spool, seat: 1cr18ni9ti, stellite alloy surfacing soft seal spool: reinforced ptfe filling: ptfe, flexible graphite bellows: 1cr18ni9ti pad film: asbestos board, 10,1 cr18ni9ti, asbestos wrap gasket membrane cover: a3 corrugated diaphragm: nbr rubber reinforced polyester fabric spring: 60si2mn stem, push rod : 2cr13 , 1cr18ni9ti

bushing: 2cr13

zjhp pneumatic diaphragm with hand wheel single-seat regulating valve technical parameters:

* this product performance indicators to implement gb / t4213-92 standards

◆ dimensions and weight standard, heat sink, high temperature type dimensions unit: mm

* cooling, high temperature type (h) is the value of pn16 ** jacket height h1 and h increased by 15%

◆ bellows sealed external dimensions

specifications weight:

regulating valve weight table unit: kg

* in this table, the weight of high temperature type of heat dissipation is based on pn16 and the low temperature type is based on pn40